Advances in Materials Mechanical and Industrial Engineering 1st Edition by Prasanta Sahoo, Paulo Davim 3319969676 9783319969671

Advances in Materials Mechanical and Industrial Engineering 1st Edition by Prasanta Sahoo, Paulo Davim – Ebook PDF Instant Download/Delivery. 3319969676, 9783319969671

Full download Advances in Materials Mechanical and Industrial Engineering 1st Edition after payment

Product details:

ISBN 10: 3319969676

ISBN 13: 9783319969671

Author: Prasanta Sahoo, J. Paulo Davim

This book presents selected extended papers from The First International Conference on Mechanical Engineering (INCOM2018), realized at the Jadavpur University, Kolkata, India. The papers focus on diverse areas of mechanical engineering and some innovative trends in mechanical engineering design, industrial practices and mechanical engineering education. Original, significant and visionary papers were selected for this edition, specially on interdisciplinary and emerging areas. All papers were peer-reviewed.

Advances in Materials Mechanical and Industrial Engineering 1st Table of contents:

1. Investigation and Optimization of Tribological Behavior of Electroless Ni–B Coating at Elevated Temperatures

2. Enhanced Thermal and Mechanical Performance of Functionalized Graphene Epoxy Nanocomposites: Effect of Processing Conditions, Different Grades and Loading of Graphene

3. Behaviour Analysis and Comparison of Tribological Characteristics of Electroless Ni–B Coating under Dry and Lubricated Condition

4. Friction and Wear Characteristics of Heat Treated Electroless Ni–P–W Coatings Under Elevated Temperature

5. Hardness, Friction and Wear Trends of Electroless Ni-W-P Coating Heat-Treated at Different Temperatures

6. Transition Reference Temperature for 20MnMoNi55 RPV Steel at Different Loading Rates

7. Comparative Study of Cyclic Softening Modelling and Proposition of a Modification to ‘MARQUIS’ Approach

8. Development and Finite Element Implementation of a Simple Constitutive Model to Address Superelasticity and Hysteresis of Nitinol

9. Abrasive Jet Machining: Drilling of Porcelain Tiles and Soda Lime Glass

10. Friction Stir Welding of Low-Carbon Steel

11. Parametric Investigation of Various Electrolytes During Micro-electrochemical Texturing on Stainless Steel

12. Analysis of Casting Defects in Investment Casting by Simulation

13. Experimental Investigation of Fiber Laser Micro-Marking on Aluminum 6061 Alloy

14. An Approach to Numerical Modeling of Temperature Field in Direct Metal Laser Sintering

15. Parametric Optimization of TIG Welding Process on Mechanical Properties of 316L Stainless Steel Using RSM

16. A Study on the Structural Behaviour of AFG Non-uniform Plates on Elastic Foundation: Static and Free Vibration Analysis

17. Free Vibration of Rotating Twisted Composite Stiffened Plate

18. Growth of Yield Front of Functionally Graded Non-uniform Bars Under Thermal Load

19. Nonlinear Static Analysis and Superharmonic Influence on Nonlinear Forced Vibration of Timoshenko Beams

20. Identification of Crack of Cantilever Beam Using Experimental Results and a Hybrid Neuro-GA Optimization Technique

21. Experimental Investigation on Static and Free Vibration Behavior of Concentrically Stiffened Plates

22. A Shaft Finite Element for Analysis of Viscoelastic Tapered and Hollow Tapered Rotors

23. Numerical Analysis of Heat Transfer and Entropy Generation for Natural Convection in a Quadrantal Cavity with Non-uniform Heating at the Bottom Wall

24. Impact of Magnetic Field on Thermal Convection in a Linearly Heated Porous Cavity

25. Effect of Turbulence on Stability of Journal Bearing with Micropolar Lubrication: Linear and Non-linear Analysis

26. MHD Convection with Heat Generation in a Porous Cavity

27. Studies on Fluid Flow Through an Elliptical Microchannel of Different Aspect Ratios

28. Stresses and Deformation in Rotating Disk During Over-Speed

29. Flow and Heat Transfer Characteristics of Surface-Mounted Cylinder in Presence of Rectangular Winglet Pair

30. GA Optimization of Cooling Rate of a Heated MS Plate in a Laboratory-Scale ROT

31. Experimental and Numerical Study of Velocity Profile of Air over an Aerofoil in a Free Wind Stream in Wind Tunnel

32. Numerical Simulation of Vortex Shedding from a Cylindrical Bluff-Body Flame Stabilizer

33. Entrepreneurial Culture-Driven Improvement of Technical Facets for Product Quality and Customer Satisfaction

34. Managerial Support in R&D Operations and Practices for Realizing Technological developments

People also search for Advances in Materials Mechanical and Industrial Engineering 1st:

what is industrial machinery

6 industrial revolution inventions

r and r material supply

x-ray imaging fundamentals industrial techniques and applications